-
STEP 1.
a: Prep and weld
cast corners to lip.
b: Square off from
straight and delta
edges to find
transition centres.
Mark a line either
side as shown.
-
STEP 2.
a: Insert metal boss
into transition
shroud from below.
b: Position transition
shroud & boss onto
lip as shown, ensure
lip and shroud
make frontal contact
and lines and edges
align.
-
STEP 3.
With the shroud
positioned insert
supplied jig as
shown. Pull boss
back with fingers
so that it touches
jig and tack weld
boss to lip in
indicated positions.
Repeat steps 2 & 3
for second shroud.
-
Step 4.
a: Insert circular
locks into both
transition shrouds
without retainers
for safety.
b: Position transition
b: Repeat steps 2 to
4 for corner shrouds
(shrouds should align
with cast corners).
-
Step 5.
Space subsequent
shrouds equally
repeating steps
2 to 4a.
-
Step 6.
Once all bosses have
been tack welded,
remove locks and
shrouds (refer to
mounting guide for
instructions).
-
Step 7.
Weld all bosses
to blade making
sure that they do
not move or that
tackwelds break
during procedure.
